Calibrating a multi-display timepiece requires a specific operational sequence to synchronize both time-keeping systems. This technical guide provides the official procedure for SKMEI 2031 dual time adjustment, ensuring your digital module and mechanical analog hands align perfectly.
SKMEI 2031 Dual Time Adjustment Procedures
Step 1: Access the Digital Time Setting Interface
Verify the watch is in the standard timekeeping mode, which displays hours, minutes, seconds, date, and day of the week. If the interface shows other functions, press the bottom-left (MODE) button repeatedly to cycle past the stopwatch and alarm until you return to the primary time screen. From there, press the bottom-left (MODE) button three times. The seconds digits will begin flashing on the digital screen.
Step 2: Reset the Seconds Counter
While the seconds digits are flashing, press the top-right (START) button once. This resets the digital seconds counter to zero.
Step 3: Calibrate hours and Select 12/24-Hour Format
Press the bottom-right (RESET) button once to transfer the flashing selection to the hour digits. Press the top-right (START) button to advance the hours. Monitor the small screen icon: “A” indicates AM, and “P” indicates PM. Continuing to advance the hours past the 12-hour cycle automatically switches the watch into 24-hour format, indicated by an “H” on the display.
Step 4: Adjust the Minute Digits
Press the bottom-right (RESET) button to move the flashing selection to the minute digits. Press the top-right (START) button to advance the digits to your current local time.
Step 5: Configure Month, Date, and Day of the Week
Press the bottom-right (RESET) button to enter the calendar adjustment sequence. The month digit will begin flashing. Press the top-right (START) button to cycle through the months (1 for January, 2 for February, up to 12). Press the bottom-right (RESET) button again to make the date digits flash, and advance them using the top-right (START) button. Press the bottom-right (RESET) button one more time to make the day-of-the-week indicator flash, and advance it using the top-right (START) button.
Step 6: Lock the Digital Settings
Press the bottom-left (MODE) button once after completing all digital configurations. The digits will stop flashing, securing the digital time and data in the module memory.
Step 7: Adjust the Mechanical Analog Hands
Locate the mechanical crown on the right side of the watch case. Pull the crown outward to its extended position. Rotate the crown clockwise to drive the analog hands forward until they precisely match the newly set digital time display. Push the crown firmly back against the case to re-engage the analog movement.
Watch Detailed Video
Operational Precautions
- Sequence Verification: The digital module digits must be flashing before any values can be modified. The adjustment sequence cannot be initialized from the stopwatch or alarm interfaces.
- Crown Rotation Direction: Always turn the mechanical crown clockwise during the analog phase of your dual time adjustment to protect the internal gear train from premature mechanical wear.
About ITSKMEI
ITSKMEI is an authorized distributor of authentic SKMEI timepieces. We supply genuine products directly from the official manufacturing facility, guaranteeing that every watch meets original factory specifications, quality control criteria, and water resistance standards.
Contact Us
For wholesale opportunities, corporate bulk ordering, or to request a pricing quotation for the SKMEI 2031 model, please contact ITSKMEI sales department directly.
